FLRT Bit
FLRT Bit - We supply the right bit!
Add to Cart
9 7/8" FSA537G , TCI Bit , Sealed Journal Bearing , Roller Cone Bit , Tricone Drill Bit
RECOMMENDED DRILLING PARAMETERS FOR APPLICATION
| Types & IADC Code | 417 |
437 447 |
517 527 |
537 547 |
617 627 |
637 | |
| WOB | KN/mm(Bit Dia.) | 0.4~0.9 | 0.4~0.9 | 0.35~1.0 | 0.5~1.0 | 0.6~1.1 | 0.7~1.2 |
| Lb/in. (Bit Dia.) | 2285~5142 | 2285~5142 | 2000~5714 | 2857~5714 | 3428~6285 | 4000~6857 | |
| Rotation Speed (Rpm) | 140~60 | 140~60 | 125~50 | 110~50 | 100~40 | 80~40 | |
The above chart represents commonly available sizes and types, we do produce other sizes and types of rock bits which do not appear on this list. Please contact us for more information.
Primary bearings are as large as possible within the limits of available space. Secondary bearings are smaller, reduced-diameter bearings located adjacent to the interior apex area in a cone. Secondary bearings provide supplemental load-bearing capability. Primary and secondary bearings can individually be either roller bearings or journal bearings. It is not uncommon for a bearing system to be made up of combinations of the two.
Seals prevent cuttings and drilling fluids from entering the bearing system and prevent lubricant from escaping the bearing system. Thrust washers are located on the end of leg journals and between the primary and secondary bearing surfaces to resist axial loading.